MDG

NOTE: All dimensions are nominal values.

Cartridge Characteristics Cartridge Configuration Extra-Flow with Center Baffle Liquid Flow Guidelines (one cartridge) 1-7 m³/hr (5-30 gpm) Membrane/Potting Material Polyolefin / Polyethylene Typical Membrane Surface Area 21.7 m² (234 ft²) Maximum Shellside Working Temperature/Pressure (Using 50 mm vacuum on lumenside) 30°C, 7.4 kg/cm² 40°C, 4.9 kg/cm² (86°F, 105 psig) (104°F, 70 psig) Maximum Temperature/ Pressure Guideline 25°C, 5.3 kg/cm² 50°C, 2.1 kg/cm² (77°F, 75 psig) (122°F, 30 psig)

Housing Characteristics Material Polypropylene Flange Connections   Shellside (Wetted surface) ㆍ1 inch Sanitary ㆍ¾ inch NPT Female ㆍ1 inch GF ㆍRc ¾ per JIS B0203 Lumenside (Gas/Vacuum) ㆍ1 inch 90° Sanitary ㆍ¾ inch 90° NPT Female ㆍRc ¾ per JIS B0203

Weight Dry 4.0 kg. (8.8 lbs.) Cartridge Only 1.1 kg. (2.5 lbs.)

Seal Options Material Applications Viton General Purpose K-UPW Ultra Pure Water

All components of the SuperPhobic® Membrane Contactor, when used in accordance with recommendations given in our product literature at and below ambient temperatures, are in compliance with all relevant FDA regulations as specified in Title 21 of the Code of Federal Regulations.

Curves represent nominal values, generated using water at 25°C. Characteristics may change under different operating conditions.